designed & dimensioned in millimeters[inches] do not scale from this print 0.15 ref (typ) .006 "c" ref 3.50 .138 ref 2 max sway (either direction) "a" "a" c l ss4-xx-3.00-d c "b" "a" ref 1.41 .056 ref 1.00 ref .039 4.35 .171 ref 1.76 ref .069 (tol. non-accumulative) 0.40[.016] (typ) 'b' c l c l c 01 02 ss4-xx-x.xx-x-d-x-xx-tr no of positions -10, *-15, -20, -30, -40, -50 (per row) row specification -d: double options -3.00: see fig. 1 (use c-229-3.00-l) -3.50: see fig. 2, sheet 2 (use c-229-3.50-l) -l: light selective gold (use c-229-x.xx-l) plating *-l: latching (use wt-40-x.xx-t) (see note 3) (leave blank for no option) lead style packaging * = tooled only for the -3.00 lead style 1.150 - 0.025 + 0.100 .0453 - .001 + .004 (measured contact to contact) 5.00 .197 2.85 0.08 .112 .003 section "a"-"a" scale 5 : 1 c-229-3.00-l c l c c c 0.10[.004] 0.75 ref .030 1.00 ref .039 1 max sway (typ) (either direction) c detail 'b' scale 15 : 1 die roll to face position 1 end c fig. 1 ss4-40-3.00-l-d shown -tr: tape and reel packaging (see note 4) **= not released for production -k: kapton pad (use k-500-300) (see fig. 4 & 5,sheet 3) -pa: pick & place with alignment pins (see fig. 6 sht 4) (not available in -15 pos) * = tooled only for the -3.00 lead style placement pad g g sheet of unless otherwise specified, dimensions are in millimeters. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: 0.4mm[.016] socket strip assembly by: ss4-xx-x.xx-x-d-x-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 4/19/2007 4 1 sheet scale: 2:1 insulator: lcp, color: black contact: phos bronze latch: phos bronze f:\dwg\misc\mktg\ss4-xx-x.xx-x-d-x-xx-tr-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pushout force: 2.22n[.5 lb]. 3. -l: latching option not intended for alignment to pcb. automated placement is recommended. 4. for quantities up to 49 pieces, no leader, trailer, or reel will be supplied. for quantities of 50-124 pieces, no leader or trailer will be supplied. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision g
fig. 2 -3.50 body height ss4-40-3.50-l-d shown (same as fig. 1, unless otherwise stated) ss4-xx-3.00-d 4.00 .157 ref 3.35 0.08 .132 .003 c-229-3.50-l c "j" 1.41 .056 0.45 .018 (ref) "h" c fig. 3 *-l: latching option ss4-40-3.00-l-d-l shown (same as fig. 1, unless otherwise stated) * = tooled only for the -3.00 lead style wt-40-x.xx-t 0.15 .006 (ref) 1.1 .044 (ref) 1.30 (typ) .051 "f" ref ss4-xx-3.00-d-l *=not tooled for -3.50 sheet of 0.4mm[.016] socket strip assembly by: ss4-xx-x.xx-x-d-x-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 4/19/2007 4 2 sheet scale: 5:1 revision g f:\dwg\misc\mktg\ss4-xx-x.xx-x-d-x-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
3.51 ref .138 "c" ref (see table 1) (see table 4) "e" +/-0.51[.020] fig. 4 -k: kapton option ss4-40-3.00-l-d-k shown (use k-500-300) (same as fig. 1, unless otherwise stated) c (see table 3) "d" 0.75 0.51 .029 .020 c 3.51 ref .138 "f" ref (see table 5) (see table 4) "e" 0.51[.020] fig. 5 -k: kapton option(w/ -l option) ss4-40-3.00-l-d-l-k shown (use k-500-300) (same as fig. 1, unless otherwise stated) c (see table 3) "d" 0.75 0.51 .029 .020 c sheet of 0.4mm[.016] socket strip assembly by: ss4-xx-x.xx-x-d-x-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 4/19/2007 4 3 sheet scale: 5:1 revision g f:\dwg\misc\mktg\ss4-xx-x.xx-x-d-x-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
9.80 .386 ref 3.80 .150 ref "k" ref (see table 7) (see table 7) "l" ppp-69 c l fig. 6 -pa: pick & place pad with alignment pins ss4-40-3.00-l-d-pa shown (same as fig. 1, unless otherwise stated) (not available in -15 pos) 5.75 .226 ref "m" (see table 8) 0.90 .035 ref 8.50 .335 ref sheet of 0.4mm[.016] socket strip assembly by: ss4-xx-x.xx-x-d-x-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 4/19/2007 4 4 sheet scale: 5:1 revision g f:\dwg\misc\mktg\ss4-xx-x.xx-x-d-x-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
